Slab Leak Detection and Repair in Gilbert, AZ

Softer water than Chandler or Mesa

Gilbert’s own water FAQ gives the average hardness at 8 to 10 grains per gallon and suggests setting a softener at 10 to 12 to allow for seasonal swings. That is below the averages Chandler and Mesa publish for their own systems. Gilbert treats SRP water at its North Water Treatment Plant on the Eastern Canal, takes CAP water through the Santan Vista plant it shares with Chandler, and pumps from 17 wells, which it leans on during peak demand and when the canals are dried out for maintenance. Softer water does not make a slab leak impossible; it just means scale is a smaller part of the story here than in some neighbouring cities.

Built in two decades

Gilbert had 5,717 residents in 1980, 109,697 in 2000 and 208,453 by 2010, and between 2000 and 2010 it was the fastest-growing place of its size in the country. Much of the town was built by production builders in that short window, and many streets repeat a handful of floor plans. Planned communities such as Val Vista Lakes, Power Ranch, Morrison Ranch and Agritopia each have their own era. Because neighbouring houses were often plumbed alike, a neighbour’s past leak can hint at where yours may be, though we still confirm by testing your own lines. Once the leak is pinned down, a small opening for a slab leak repair is often all a house of this age needs.

Front yards and the service line

Not every leak that shows up on the meter is under the house. The pipe from the meter box to the house wall runs beneath the front yard, and settling, roots or a nicked fitting from landscaping work can open it up. A soft or constantly green patch between the sidewalk and the front door is a clue. We separate the house from the yard at the shut-off before any under-floor detection, and if the yard line is at fault, main line repair is the fix.

Around Gilbert

Gilbert’s western edge meets Chandler, and Mesa lies along the north.

Gilbert slab leak questions